usahydro
Hydrostatic Transmission Service, LLC offers Sundstrand hydrostatic pumps Sundstrand hydrostatic motors, sundstrand hydrostatic transmissions Sundstrand hydrostatic parts,eaton hydrostatic pumps, eaton hydrostatic motors, eaton hydrostatic transmissions eaton hydrostatic parts rexroth hydrostatic pumps, rexroth hydrostatic motors, rexroth hydrostatic transmissions, rrexrith hydrostatic parts, kawasaki hydrostatic pumps, Kawasaki hydrostatic motors, Kawasaki hydrostatic transmissions, Kawasaki hydrostatic parts,dynapower hydrostatic pumps, dynapower hydrostatic motors, dynapower hydrostatic transmissions, dynapower hydrostatic parts hydrostatic parts hydrostatic pump parts, hydrostatic motor parts,hydrostatic repair parts, hydrosatatic drive parts, hydrostatic transmission parts,  For all of your hydrostatic needs. " title="Hydrostatic Transmission Service, LLC offers Sundstrand hydrostatic pumps Sundstrand hydrostatic motors, sundstrand hydrostatic transmissions Sundstrand hydrostatic parts,eaton hydrostatic pumps, eaton hydrostatic motors, eaton hydrostatic transmissions eaton hydrostatic parts rexroth hydrostatic pumps, rexroth hydrostatic motors, rexroth hydrostatic transmissions, rrexrith hydrostatic parts, kawasaki hydrostatic pumps, Kawasaki hydrostatic motors, Kawasaki hydrostatic transmissions, Kawasaki hydrostatic parts,dynapower hydrostatic pumps, dynapower hydrostatic motors, dynapower hydrostatic transmissions, dynapower hydrostatic parts hydrostatic parts hydrostatic pump parts, hydrostatic motor parts,hydrostatic repair parts, hydrosatatic drive parts, hydrostatic transmission parts,  For all of your hydrostatic needs. Hydrostatic Transmission Service, LLC offers Sundstrand hydrostatic pumps Sundstrand hydrostatic motors, sundstrand hydrostatic transmissions Sundstrand hydrostatic parts,eaton hydrostatic pumps, eaton hydrostatic motors, eaton hydrostatic transmissions eaton hydrostatic parts rexroth hydrostatic pumps, rexroth hydrostatic motors, rexroth hydrostatic transmissions, rrexrith hydrostatic parts, kawasaki hydrostatic pumps, Kawasaki hydrostatic motors, Kawasaki hydrostatic transmissions, Kawasaki hydrostatic parts,dynapower hydrostatic pumps, dynapower hydrostatic motors, dynapower hydrostatic transmissions, dynapower hydrostatic parts hydrostatic parts hydrostatic pump parts, hydrostatic motor parts,hydrostatic repair parts, hydrosatatic drive parts, hydrostatic transmission parts,  For all of your hydrostatic needs. " title="Hydrostatic Transmission Service, LLC offers Sundstrand hydrostatic pumps Sundstrand hydrostatic motors, sundstrand hydrostatic transmissions Sundstrand hydrostatic parts,eaton hydrostatic pumps, eaton hydrostatic motors, eaton hydrostatic transmissions eaton hydrostatic parts rexroth hydrostatic pumps, rexroth hydrostatic motors, rexroth hydrostatic transmissions, rrexrith hydrostatic parts, kawasaki hydrostatic pumps, Kawasaki hydrostatic motors, Kawasaki hydrostatic transmissions, Kawasaki hydrostatic parts,dynapower hydrostatic pumps, dynapower hydrostatic motors, dynapower hydrostatic transmissions, dynapower hydrostatic parts hydrostatic parts hydrostatic pump parts, hydrostatic motor parts,hydrostatic repair parts, hydrosatatic drive parts, hydrostatic transmission parts,  For all of your hydrostatic needs.
45GPM FIXED INLINE 
PISTON PUMP

Welcome To Hydrostatic Transmission Service LLC.

For Web Site Translation Click Your Flag

Vickers Hydrostatic Parts and Vickers Repair

Hydrostatic Transmission Service, LLC offers Vickers hydrostatic pumps Vickers hydrostatic motors, Vickers hydrostatic transmissions Vickers hydrostatic parts,Vickers hydrostatic pumps, Vickers hydrostatic motors, Vickers hydrostatic transmissions

http://www.hydrostatic-transmission.com

45GPM FIXED INLINE PISTON PUMP REPAIR

HYDROSTATIC TRANSMISSION SERVICE,LLC OFFERS VICKERS HYDROSTATIC PARTS AND VICKERS HYDROSTATIC REPAIR

Put the whole unit with tubing into
an arbor press with drive spline up.  See Figure 20.
Push the drive shaft through the bearing
and out of the unit.  A 0. 001 inch press exists linking
the shaft and bearing so substantial force is necessary
to remove the bearing from the shaft.
Remove yoke as follows:
Remove yoke bearing parts (49 through
58).  Be wary not to damage the seal on the long
pintle during removaL  If burrs are present on the pintle,
clean-up with an India stone before removing  pintle
cover.
Keep shims (51) and (56) if possible and
use a micrometer to determine each shims thickness.
If the yoke pintle bearings are not faulty, the same
shims or new shims of the same thickness will be
needed to preload the bearings at the time of set up.
REMINDER
If shims (51) or (56) were damaged during disassembly, a yoke bearing preload modification will be vital at assembly.
Slide yoke (61) from side to side to release
yoke bearing races (59) or (60) within the housing.  The
races are a normal slip fit but may be tight.  Use an
open end wrench connecting the yoke and the pintle bear¨
ing to help slide out the races.  Use the amount of relevant pressure to
bearing (59) or (60) at the approximate center and al¨
low the bearing rollers to gently push the race out of
the housing.
Remove yoke (61) from housing (32).
Raise front shaft bearing (62) from the housing.
DO NOT remove the bearing race unless bearing was
found faulty.  Refer to Figure 21 for bearing race
removal instructions. 
Remove retaining ring (63) and push shaft
seal (64) out of the housing.  Utilize a short piece of 1 ^"
heavy wall tubing as a tool or if the yoke was not re¨
moved, apply a tar ass rod and work from the inside of the
housing to drive shaft seal (64) from the housing.
REMINDER
Every one of the parts ought to be thoroughly cleaned and kept clean during examination and assembly. Clean every one of the detached parts, using a commercial cleaner that is similar in temperament with the system fluid. Compressed air may be used in cleaning, but it is the filtering that will remove the water and contaminates. Clean compressed air is predominantly useful in cleaning valve block pas¨sages.

.  INSPECTION REPAIR AND REPLACEMENT
MAKE NOTE OF
Restore all parts that do not meet the following requirement:
Examine vane pump shaft (17) for wear and chip¨-
ped splines.
Make sure bearing spacer (37) for burrs.  Eliminate
small burrs with an India stone.
Scrutinize cylinder block face (38) for wear,
scratches and/or erosion involving the cylinders.  Check
the spring, washers and retaining ring removed from
inside the cylinder block.
Ensure each cylinder block bore for unnecessary
wear.  Use the piston and shoe subassemblies (39) for
this reason. The piston should be a close fit and
glide easily in and out of the bore.  No bind can be tol¨
erated.  If binding is obvious, clean the cylinder block
and piston, oil with clean hydraulic fluid and try
once more  Even minor contamination of the fluid could
be the reason the piston will freeze up in the cylinder bore.
Examine both piston and shoe subassembly (39)
for a maximum end play of 0. 003 inch between the
piston and shoe.
Each shoe of the nine piston and shoe S/A's
(39) must be ensured of thickness.It should be
within 0. 001 inch of each other.  If out of tolerance,
restore the whole set of piston and shoe subassem¨-
blies simultaneously.
Check shoe plate (40) for too much wear and
cracking in the area of spherical washer (41). If serious
wear or cracks are found, change the shoe plate and
spherical washer at the same time.
Make sure spherical washer (41) for burrs, wear
and likely scratches due to pin (42) breakage.  Re-
place if wear is unnecessary.
Look over pins (42) for equal length, too much
wear and probable bending.  Replace all pins simulta-¨
neously if one is not working.

 

 The pin retainer (43) might develop burrs; move all burrs with an India stone.
Examine the bronze face of wafer plate (35) for
to much wear, scratches, and likely fracture.  If
the wafer plate is cracked, make sure the new plate
rests flat next to the valve block at assembly and that
wafer plate pin (36) does not level too far and hold the
wafer plate away from the valve block.
Inspect shaft (48) for broken splines, burrs,
and wear in the area of shaft seal (64).  Remove burrs
with an India stone.  Wear in excess of 0. 005 T. I. R.
has to have shaft replacement to stop leakage

Hydrostatic Transmission Service, LLC offers Vickers hydrostatic pumps Vickers hydrostatic motors, Vickers hydrostatic transmissions Vickers hydrostatic parts,Vickers hydrostatic pumps, Vickers hydrostatic motors, Vickers hydrostatic transmissions

45 gpm fixed inline piston pump
(M) pfb45-(F)rf-10/11
(M) pfb45 (F) LF 10/11
F6 PFB45(F) 10/11
I-3250 s

 

45GPM FIXED INLINE PISTON PUMP#B
45GPM FIXED INLINE PISTON PUMP#B

  Visit us at our

EBay store: Hydrostatic Transmission Service

 And Check Out Our Great Deals.

Hydrostatic Transmission Service, LLC offers hydraulic pump, hydraulic motor, hydraulic valve repair, Gear pump repair, piston pump repair, vain pump repair, and all pump repair

For the following Equipment

Nachi, Sundstrand, Eaton, Vickers, Racine, Commercial, Cessna ,Poclain, Hitachi, Kawasaki, Dynapower, Oil-Gear,Shibaura ,Volvo, Denison, komatsu, Hydash ,Rexroth ,Uchida, Breuninghaus Yamaha, Barnes ,Mitisibushi, Sumitimino,

When you need All Hydraulic Pump Repair, call us first!

If We can not help you we will put you in touch with someone who can.

All Pump Repair

Hydraulic pump, Hydraulic motor, Hydraulic valve, piston pump Repair Center.

We offer hydraulic pump repair hydrostatic drive repair hydraulic transmission repair hydraulic motor repair hydraulic equipment repair for the following

Sundstrand, Eaton, Rexroth, Kawasaki, and others.

CALL US FOR YOUR REPAIR ON DIFFICULT TO LOCATE VICKERS HYDRAULIC TRANSMISSION REPAIR.

MITSUBISHI, KAWASAKI, DAEWOO ,DYNAPOWER, LINDE, REXROTH, UCHIDA, YAMAHA, HITACHI, KOMATSU, LIEBHERR, POCLAIN, VOLVO, VICKERS, CESSNA, HYDROMATIK AND SUNDSTRAND AND EATON CLOSED LOOP AND OPEN LOOP HYDRAULIC DRIVE PUMPS AND MOTORS.

 

(800) 361-0068

2835 Westover Park Suite A 
Tupelo, MS 38801
Phone: (662) 680-8899
Toll Free: (800) 361-0068

Contact US

Email: [email protected]

PayPal service to make fast, easy, and secure payments for your Internet purchases!
PayPalóeBay's service to make fast, easy, and secure payments for your eBay purchases!
 Visa Mastercard Discover American Express eCheck

 

Disclaimer: All references to OEM words are strictly for reference only and does not imply that we are an OEM distributor.

This web site is Copyright © 2004 - 2005, Hydrostatic Transmission Service LLC. All rights reserved.

[Home] [Sundstrand] [Case parts] [Caterpillar parts] [Daewoo parts] [Denison parts] [Dynapower parts] [Eaton Parts] [Kayaba parts] [Koehring parts] [Linde parts] [Linkbelt parts] [Komatsu parts] [Kawaski parts] [Mitisubishi parts] [Rexroth parts] [Teijin Seki parts] [Timberjack parts] [Vickers parts] [Sundstrand  Parts] [Hyundai parts] [Excavator  Pumps] [Hydrostatic  Hydraulic Repair] [Sundstrand  Parts] [Series 40  Sundstrand] [VICKERS PUMPS] [45GPM FIXED  INLINE  PUMP] [VICKERS PARTS & REPAIR] [Vickers  Hydrostatic Repair] [Open Circuit  Control Systems] [Denison  Parts & Repair]